JLM J02380 Turbo Cleaner is one of the best Turbo Cleaners available on the market right now. It is an inexpensive product, easy to use and removes dirt and soot extremely effectively.

 

Economical, extremely easy to use and removes dirt and soot very effectively. If you say turbo, you say: all systems go! And yes, that is absolutely true. After all, a turbo has been developed to considerably increase the power of a gasoline or diesel engine. But what to do if that fine pacer gradually gets contaminated under the hood? This shortcoming manifests itself quickly because a dirty turbo results in loss of power, unnatural power build-up, increased full consumption or even an excessively smoking engine.

 

If you cover a lot of short distances, are often in a traffic jam and the turbo is only lightly loaded, it will not become 'clean'. And that will become clear over time. Because dirt and soot are the biggest enemies of a turbo, and because of exhaust gasses a turbo can get pretty polluted. If a turbo is dirty, there is a risk of wear and, moreover, the VGT turbine wheel (turbocharger with variable geometry) may get stuck. It cannot rotate properly and therefore cannot do its work as it should. Replacement is extremely expensive and often unnecessary. Thorough cleaning of the turbo - without dismantling (!) - is the most economical and logical next step.

 

That next step is called JLM Diesel Turbo Cleaner. This proven JLM product works just as simply and uncomplicated as the name suggests. JLM Turbo Cleaner has been developed to restore engine performance, reduce soot emissions and is suitable for all diesel engines. JLM Turbo Cleaner is very easy to use, the liquid can easily be added to the diesel in the fuel tank. And there you go: fast and affordable turbo cleaning is now a fact.

 

After using JLM Turbo Cleaner, dirt and soot have disappeared. The turbo can boost engine performance again and the air-fuel ratio is ideal. Immediately after JLM Turbo Cleaner has done its invisible job, you notice while driving that the turbo is like new. In short, JLM Turbo Cleaner increases the service life, cleans the turbo and restores the original output.

 

Product Usage:

 

Important Usage Guidelines for JLM Diesel Turbo Cleaner

 

1. Preparation

 

Ensure the fuel tank is nearly empty before treatment.

2. Application

 

Pour the full contents of the bottle into the diesel fuel tank.

Fill the tank with diesel to ensure proper mixing.

3. Test Drive

 

Drive the vehicle for 20–30 minutes, ideally maintaining engine speeds above 3,000 RPM for effective treatment.

Dosage

 

One 500ml bottle treats up to 70 litres of diesel fuel.

Follow the manufacturer’s guidelines for best results and use as part of your regular maintenance routine.